100,000 BTU Furnace, 80% Efficiency, Single-Stage Burner, 2000 CFM Multi-Speed Blower, Downflow

Goodman GDS81005CN

SKU: GDS81005CN Category:

Description

The Goodman GDS8 dedicated downflow (blows air into ducts located below it) gas furnaces features a patented aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these gas heaters can be installed in a utility room, closet, alcove, basement or attic. (Not intended for use in mobile homes.)

Features:

Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit (see Accessories tab).
Corrosion-resistant, aluminized-steel furnace tubular heat exchanger
Designed for dedicated downflow installations
Energy-saving, reliable furnace hot surface ignition system with patented adaptive learning algorithm to maximize igniter life
Aluminized furnace steel inshot burners
Energy-saving PSC, multi-speed, direct drive furnace blower motor
Heater has quiet, corrosion-resistant induced draft blower assembly
Integrated furnace control with diagnostics
Low voltage terminal blocks
Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
40VA transformer for heating and air conditioning control service
Combination redundant furnace gas valve and regulator
A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
Specific Goodman furnace models comply with California NOx Standards (models that end in “X”)
Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
Attractive architectural gray paint finish
Foil-face insulation lines the furnaces’ heat exchanger compartment
Coil and furnace fit flush for easy installation
Convenient left or right connection for gas and electric service
This gas furnace has removable, solid-bottom block off

Specifications

Need help? Ask An Expert
  • ConfigurationDownflow
  • BTU Range61,000 - 80,000 BTU's
  • Blower Cooling Capacity3.0 Tons, 3.5 Tons, 4.0 Tons, 5.0 Tons
  • Maximum Input BTU100000 BTU
  • Max BTU80000 BTU
  • Maximum CFM2037@ 0.5
  • Efficiency80+%
  • Blower TypeMulti-Speed
  • Burner StagesSingle
  • Maximum Overcurrent Protection (Breaker)15 Amps
  • Fuel TypeGas
  • Gas TypeLP Capable (Kit Required) / Natural Gas
  • ENERGY STAR QualifiedNo
  • Vent Connection4 Inches
  • Supply Air Opening Size19.5 x 19.625 Inches
  • Flue Pipe Diameter4
  • Product Weight175 lbs
  • Shipping Weight175 lbs
  • Meets CSA StandardsYes
  • Meets Canadian OEE StandardsNo
  • California ApprovedNo
  • Width21 Inches
  • Depth28 Inches
  • Height34 Inches
  • Voltage120 Volts
  • Frequency60 Hz
  • Voltage Phase1

Product Reviews