40,000 BTU Furnace, 80% Efficiency, Single-Stage Burner, 1200 CFM Multi-Speed, Upflow/Horizontal Flow

Goodman GMS80403AN

SKU: GMS80403AN Category:

Description

The Goodman GMS8/GDS8 multi-position gas furnaces feature a patented aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these gas heaters can be installed in a utility room, closet, alcove, basement or attic. (Not intended for use in mobile homes.)

Furnace Features:

Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit (see Accessories tab).
Corrosion-resistant, aluminized-steel tubular furnace heat exchanger
Furnace is designed for multi-position installation – Goodman GMS8: upflow, horizontal right or left; Goodman GDS8: dedicated downflow
Energy-saving, reliable hot surface ignition system with Goodman furnace patented adaptive learning algorithm to maximize igniter life
Aluminized steel inshot gas furnace burners
Energy-saving PSC, multi-speed, direct drive blower motor
Quiet, corrosion-resistant induced draft furnace blower assembly
Integrated Goodman furnace control with diagnostics
Low voltage terminal blocks
Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
40VA transformer for heating and air conditioning control service
Combination redundant gas valve and regulator
A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
Furnace has heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
Attractive architectural gray paint finish
Heater’s foil-face insulation lines the heat exchanger compartment
Coil and furnace fit flush for easy installation
Convenient left or right connection for gas and electric service
Bottom or side air inlet (Goodman GMS8)
Removable, solid-bottom block off
This furnace does not comply with California NOx Standards (the Goodman furnace models that end in “X” do comply). This furnace is not for sale to the state of California due to emissions laws. Please see our high efficiency Goodman furnaces (models GMS9, GCS9, GMV9, GCV9, GMH) which are compliant with California laws.

Specifications

Need help? Ask An Expert
  • ConfigurationHorizontal / Upflow
  • BTU Range40,000 - 60,000 BTU's
  • Blower Cooling Capacity1.5 Tons, 2.0 Tons, 2.5 Tons, 3.0 Tons
  • Maximum Input BTU40000 BTU
  • Max BTU32000 BTU
  • Maximum CFM1298 @ 0.5
  • Efficiency80+%
  • Blower TypeMulti-Speed
  • Burner StagesSingle
  • Maximum Overcurrent Protection (Breaker)15 Amps
  • Fuel TypeGas
  • Gas TypeLP Capable (Kit Required) / Natural Gas
  • ENERGY STAR QualifiedNo
  • Vent Connection4 Inches
  • Supply Air Opening Size12.5 x 19.5 Inches
  • Flue Pipe Diameter4
  • Product Weight120 lbs
  • Shipping Weight120 lbs
  • Meets CSA StandardsYes
  • Meets Canadian OEE StandardsNo
  • California ApprovedNo
  • Width14 Inches
  • Depth28 Inches
  • Height33.375 Inches
  • Voltage115/120 Volts
  • Frequency60 Hz
  • Voltage Phase1

Product Reviews