100,000 BTU Furnace, 80% Efficiency, Single-Stage, 2000 CFM Multi-Speed, Downflow, Low NOx Emission

Goodman GDS81005CX

SKU: GDS81005CX Category:

Description

The Goodman GDS8 dedicated downflow (blows air into ducts located below it) gas furnaces features a patented aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these gas heaters can be installed in a utility room, closet, alcove, basement or attic. (Not intended for use in mobile homes.)

Features

  • Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit.
  • Corrosion-resistant, aluminized-steel furnace tubular heat exchanger
  • Designed for dedicated downflow installations
  • Energy-saving, reliable furnace hot surface ignition system with patented adaptive learning algorithm to maximize igniter life
  • Aluminized furnace steel inshot burners
  • Energy-saving PSC, multi-speed, direct drive furnace blower motor
  • Heater has quiet, corrosion-resistant induced draft blower assembly
  • Integrated furnace control with diagnostics
  • Low voltage terminal blocks
  • Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
  • 40VA transformer for heating and air conditioning control service
  • Combination redundant furnace gas valve and regulator
  • A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
  • Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
  • Specific Goodman furnace models comply with California NOx Standards (models that end in “X”)
  • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
  • Attractive architectural gray paint finish
  • Foil-face insulation lines the furnaces’ heat exchanger compartment
  • Coil and furnace fit flush for easy installation
  • Convenient left or right connection for gas and electric service
  • This gas furnace has removable, solid-bottom block off

Specifications

Need help? Ask An Expert
  • ConfigurationDownflow
  • BTU Range61,000 - 80,000 BTU's
  • Blower Cooling Capacity3.0 Tons, 3.5 Tons, 4.0 Tons, 5.0 Tons
  • Maximum Input BTU100000 BTU
  • Max BTU80000 BTU
  • Maximum CFM2037@ 0.5
  • Efficiency80+%
  • Blower TypeMulti-Speed
  • Burner StagesSingle
  • Maximum Overcurrent Protection (Breaker)15 Amps
  • Fuel TypeGas
  • Gas TypeLP Capable (Kit Required) / Natural Gas
  • ENERGY STAR QualifiedNo
  • Vent Connection4 Inches
  • Supply Air Opening Size19.5 x 19.625 Inches
  • Flue Pipe Diameter4
  • Product Weight175 lbs
  • Shipping Weight175 lbs
  • Meets CSA StandardsYes
  • Meets Canadian OEE StandardsNo
  • California ApprovedNo
  • Width21 Inches
  • Depth28 Inches
  • Height34 Inches
  • Voltage120 Volts
  • Frequency60 Hz
  • Voltage Phase1

Product Reviews